How Do I Charge My DJI Mini 4 Pro 1 1

How Do I Charge My DJI Mini 4 Pro

Welcome to our article on how to charge your DJI Mini 4 Pro drone.

In this guide, we will provide you with all the necessary information you need to efficiently charge your drone battery.

Summary – How Do I Charge My DJI Mini 4 Pro

To charge your DJI Mini 4 Pro, first ensure the drone is powered off, then connect the appropriate DJI-provided charger to the drone’s battery. Monitor the charging process and disconnect the charger once the battery is fully charged, as indicated by all the battery level LEDs turning off.

From compatible chargers to full charge time and power bank charging, we’ve got you covered.

Additionally, we will share some safety tips and troubleshooting advice for any charging issues you may encounter.

So, let’s dive in and ensure your DJI Mini 4 Pro is always ready for your next flight.

How to Charge the DJI Mini 4 Pro | Summary

To charge the DJI Mini 4 Pro drone, follow these steps:

  1. Power off the drone and remove the Intelligent Flight Battery.
  2. Use the included DJI 30W USB-C charger or another USB PD charger. Do not use low amperage phone chargers.
  3. Attach the Intelligent Flight Battery directly to the charger or insert into the Two-Way Charging Hub if charging multiple batteries.
  4. Charging status LEDs will blink to indicate charge level. All LEDs will turn off when fully charged after ~58 minutes (battery alone) or ~70 minutes (on drone).
  5. Disconnect battery when fully charged. Batteries should be charged to 100% before each flight for optimal performance.

Important: Only use DJI approved chargers for safe charging. Monitor the process and stop charging if batteries become hot. Fully recharge batteries that have been idle for over 10 days before flying.

close up shot of dji mini 4 pro battery

Charging DJI Mini 4 Pro Drone Battery

When it comes to charging your DJI Mini 4 Pro drone battery, there are a few key points to keep in mind.

Firstly, make sure the drone is powered off before connecting the charger.

Secondly, use the appropriate charger that is specifically designed for the DJI Mini 4 Pro.

Lastly, monitor the charging process and disconnect the charger once the battery is fully charged to ensure optimal performance.

Ensure the drone is powered off

To ensure proper charging of the DJI Mini 4 Pro drone battery, it is essential to power off the aircraft.

This is crucial for drone safety and to maximize the battery lifespan. When the drone is powered off, it reduces the risk of accidents or mishaps during the charging process.

Additionally, it is important to take certain charging precautions. Use only compatible power sources and avoid using third-party chargers that may damage the battery or even pose a safety hazard.

Moreover, optimizing the charging time is also a consideration. It is recommended to use the original charger provided by DJI, as it is specifically designed to charge the battery efficiently.

Use the appropriate charger

To ensure a safe and efficient charging process for your DJI Mini 4 Pro drone, it is crucial to use the appropriate charger provided by DJI.

Using third-party chargers can be risky as they may not meet DJI’s testing standards and could potentially damage the battery or reduce its lifespan.

Here are some charging precautions, battery charging tips, and charging safety measures to follow when using the appropriate charger:

  1. Always use the charger provided by DJI or a USB Power Delivery charger.
  2. Make sure the charger is in good condition and free from any damage.
  3. Plug the charger into a stable power source and avoid using extension cords.
  4. Follow the recommended charging guidelines provided by DJI, such as charging the battery at room temperature and avoiding overcharging or undercharging.
dji mini 4 pro carry case

Connect the charger

To charge your DJI Mini 4 Pro drone battery, follow these steps:

  1. Connect the charger provided by DJI or a USB Power Delivery charger.
  2. Securely plug the charger into a power source.
  3. Connect the other end of the charger to the charging port on the battery.

It is important to note that using a charger other than the one provided by DJI may affect the charging efficiency and battery lifespan.

The charging time will vary depending on whether the battery is mounted to the aircraft or inserted into the DJI Mini 4 Pro Two-Way Charging Hub.

On average, it takes approximately 70 minutes to fully charge the battery when mounted to the aircraft, and approximately 58 minutes when inserted into the charging hub.

It is also worth mentioning that the battery capacity and charging efficiency may affect the overall charging time.

Monitor the charging process

The monitoring of the charging process for the DJI Mini 4 Pro drone battery involves observing the battery level LEDs and ensuring a smooth and efficient charging experience.

Here are some key points to consider when monitoring the charging process:

  1. Battery level indicators: The battery level LEDs on the Intelligent Flight Battery will blink sequentially, indicating the current battery level. When all the LEDs are off, it means the battery is fully charged.
  2. Charging speed: Keep an eye on the charging speed. The DJI Mini 4 Pro charger is designed to charge the battery at an optimal rate, ensuring a quick and efficient charging process.
  3. Battery capacity: Take note of the battery capacity. The DJI Mini 4 Pro battery has a capacity of 5870mAh, which determines the amount of flight time you can expect.
  4. Charging safety: Always prioritize charging safety. Use the original charger and cable provided by DJI, and avoid charging in extreme temperatures or in unstable environments.

Disconnect the charger

After monitoring the charging process and ensuring that the battery is fully charged, it is important to disconnect the charger from the DJI Mini 4 Pro drone. This step is crucial to maintain the battery’s lifespan and ensure its longevity.

Leaving the charger connected for an extended period can lead to overcharging, which can degrade the battery’s performance over time. Disconnecting the charger also helps improve charging efficiency as it prevents any unnecessary energy consumption.

Additionally, it is essential to disconnect the charger for battery storage purposes. Storing the battery with the charger connected can cause damage and pose a safety risk.

Lastly, disconnecting the charger once the battery is fully charged allows you to utilize the drone at its maximum charging speed when needed.

replacing dji mini 4 pro battery

Compatible Charger for DJI Mini 4 Pro

One recommended charger for the DJI Mini 4 Pro drone is the DJI 30W USB-C Charger. This charger supports USB Power Delivery (USB PD) fast charging protocol, making it an efficient option for charging the drone’s Intelligent Flight Battery.

Here are some compatible chargers for the DJI Mini 4 Pro:

  1. DJI 30W USB-C Charger: This charger is specifically designed for the DJI Mini 4 Pro and supports USB PD fast charging. It can be used to charge the battery when mounted to the aircraft or inserted into the Two-Way Charging Hub.
  2. USB Power Delivery chargers (up to 30W): Other USB PD chargers that can deliver up to 30W are also compatible with the DJI Mini 4 Pro. These chargers provide fast and efficient charging for the drone’s batteries.
  3. 5V/2A charger: If you don’t have access to a DJI or USB PD charger, a 5V/2A charger can be used as an alternative. Although it may not provide the fastest charging speed, it is a convenient option for charging the drone’s batteries.
  4. 65W charger (unofficial): While a 65W charger can be used to charge the DJI Mini 4 Pro drone’s batteries, it is not officially recommended by DJI and its compatibility with USB PD protocol is unclear.

Remember to always use chargers provided by DJI or those that meet their testing standards to ensure the safety and longevity of your drone’s batteries.

dji mini 4 pro in flight 1

Full Charge Time for Mini 4 Pro

To determine the full charge time for the DJI Mini 4 Pro, it is important to consider the charging method and the specific charger used. When using the DJI 30W USB-C Charger with the battery mounted to the aircraft, it takes approximately 70 minutes to fully charge.

However, if the battery is inserted into the DJI Mini 4 Pro Two-Way Charging Hub, it takes approximately 58 minutes to fully charge.

Several factors can affect the charging time of the DJI Mini 4 Pro. The optimal charging temperature range is between 5°C and 40°C, so charging in temperatures outside of this range may result in longer charging times.

Additionally, the age of the battery can also impact charging time. As the battery ages, its capacity decreases, which means it may take longer to charge fully.

It is important to follow charging safety precautions to ensure the longevity and safety of the battery. This includes using the recommended charger and charging method, avoiding overcharging or charging in extreme temperatures, and keeping the battery away from flammable materials.

Using the DJI Mini 4 Pro Two-Way Charging Hub offers several benefits. It allows for simultaneous charging of multiple batteries, reducing overall charging time. It also features a discharge function, which can help maintain the battery’s optimal performance.

To extend the battery life of the DJI Mini 4 Pro, it is recommended to avoid deep discharges and overcharging. It is also important to store the battery in a cool, dry place when not in use. Regularly updating the firmware of the aircraft and batteries can also optimize charging performance.

dji mini 4 pro drone scenic flight

Power Bank Charging for DJI Mini 4 Pro

The use of a power bank for charging the DJI Mini 4 Pro drone offers a convenient and portable solution for extending its battery life.

Here are some important considerations when using a power bank for charging:

  1. Power bank compatibility: Ensure that the power bank you choose supports USB Power Delivery (USB PD) fast charging protocol and can deliver up to 30W, as this is the maximum charging power supported by the DJI Mini 4 Pro.
  2. Charging speed: Look for a power bank with a USB-C output that can deliver up to 30W, as this will provide faster charging compared to lower power outputs.
  3. Power bank capacity: Consider a power bank with a higher capacity, such as 20000mAh, to charge the drone’s battery multiple times. This ensures that you have enough power for extended flights.
  4. Mobile power source: The Two-Way Charging Hub for the DJI Mini 4 Pro can also be used as a mobile power source. This means you can charge the drone’s batteries in the hub and then use the hub to charge other devices, such as your smartphone or tablet.
dji drone mini 4 pro fixes and issues

Safety Tips for Mini 4 Pro Charging

When it comes to charging your DJI Mini 4 Pro drone, safety should be a top priority. Here are some important tips to keep in mind:

  • Always use the appropriate charger provided by DJI.
  • Closely monitor the charging process to prevent overcharging or overheating.
  • Properly maintain the battery to ensure optimal performance.
  • Avoid storing the battery fully discharged for a long period.
  • Always charge in a safe environment free from any potential hazards.

Following these safety precautions will help protect your drone and ensure a smooth charging experience.

Use the appropriate charger

Using the correct charger is crucial for safely charging your DJI Mini 4 Pro. Here are some reasons why you should use the appropriate charger:

  1. Charging safety: DJI provides chargers that have been tested and meet safety standards. Using a third-party charger may pose a risk of damaging the battery or even causing a fire.
  2. Charging efficiency: DJI chargers are designed to deliver the optimal amount of power to your Mini 4 Pro. Using the correct charger ensures that your drone charges efficiently and effectively.
  3. Charging speed: DJI chargers are specifically designed to charge your Mini 4 Pro at the fastest possible speed. Using a different charger may result in slower charging times.
  4. Charging precautions: DJI chargers come with built-in safety features such as overcharge protection and temperature control. These safeguards help protect your battery and prolong its lifespan.

Monitor the charging process

To ensure the safe and efficient charging of your DJI Mini 4 Pro, it is important to closely monitor the charging process.

First, pay attention to the battery charging speed. The LED lights on the Intelligent Flight Battery will blink sequentially to indicate the current battery level.

Once all the LEDs turn off, it means the battery is fully charged. It is crucial to disconnect the aircraft and charger at this point to avoid overcharging.

Additionally, keep in mind the optimal charging temperature, which is between 5°C to 40°C (41°F to 104°F). Charging your Mini 4 Pro within this temperature range will ensure better charging efficiency and help prolong the battery lifespan.

Lastly, always follow the charging safety precautions provided by DJI to prevent any potential hazards.

how to use the dji mini 4 pro

Battery maintenance

For optimal battery maintenance while charging the DJI Mini 4 Pro, it is essential to adhere to safety guidelines and recommendations provided by DJI.

Here are some important tips to ensure the longevity and performance of your battery:

  1. Battery Activation: Before using the battery for the first time, make sure to fully charge and discharge it to activate its cells and optimize its performance.
  2. Battery Replacement: If you notice a significant decrease in flight time or the battery fails to charge properly, it may be time to consider replacing it with a new one.
  3. Battery LED Indicators: Pay attention to the battery’s LED indicators during charging. They provide important information about the charging status, such as whether the battery is fully charged or still in the process of charging.
  4. Troubleshooting Charging Issues: If you encounter any issues while charging, such as the battery not charging or taking longer than usual, refer to the DJI Fly app for troubleshooting steps or contact DJI Support for assistance.

Avoid storing the battery fully discharged for an extended period

Storing the DJI Mini 4 Pro battery fully discharged for an extended period can have detrimental effects on its performance and lifespan.

Avoid storing the battery in a fully discharged state for long periods, as this can lead to irreversible damage and reduce its overall capacity.

To ensure optimal charging efficiency and battery lifespan, it is important to follow some charging precautions and take proper care of the battery.

It is recommended to store the battery at around 50% charge in a cool and dry place. This helps to maintain the battery’s health and prolong its lifespan.

Additionally, always ensure that you are using the correct charger and charging cable provided by DJI to ensure charging safety.

dji mini 4 pro unfolded

Charge in a safe environment

It is crucial to always charge your DJI Mini 4 Pro in a safe environment, ensuring that you are in a cool and dry location away from flammable materials.

By following safe charging practices, you can prevent battery damage and extend the lifespan of your battery.

Here are some important tips to keep in mind:

  1. Choose the right charging location: Find a well-ventilated area with a stable surface to place your charger and battery. Avoid charging near heat sources or in direct sunlight.
  2. Importance of battery cooling: Allow your battery to cool down after a flight before charging it. This helps to prevent overheating and ensures a more efficient charging process.
  3. Battery lifespan and maintenance: Regularly check your battery for any signs of damage or swelling. Keep it clean and avoid exposing it to extreme temperatures.
  4. Safety precautions: Always monitor the charging process and never leave your battery unattended. Use only the charger provided by DJI and avoid using third-party chargers that may cause damage.

Battery activation

To ensure the safe and efficient charging of your DJI Mini 4 Pro battery, it is important to activate the battery before its initial use. Drone battery activation is a simple process that helps to optimize the battery’s performance.

To activate the battery, connect it to the charger and plug it into a power source. The battery will start charging automatically. It is important to charge the battery in a safe environment, away from flammable materials and sources of heat.

Also, make sure to use the charger provided by DJI and avoid using power banks or other third-party chargers, as they may not be compatible and can cause damage to the battery.

If you encounter any troubleshooting issues during the activation process or while charging, refer to the user manual or contact DJI customer support for assistance.

In case the battery needs to be replaced, DJI offers battery replacement options for the Mini 4 Pro.

mini 4 pro camera settings

Troubleshooting DJI Mini 4 Pro Charging Issues

Now, let’s address some common troubleshooting points for DJI Mini 4 Pro charging issues.

We’ll discuss checking the charger and battery, understanding the battery LED indicators, changing the charging method, and checking for overheating.

Check the Charger

To troubleshoot charging issues with the DJI Mini 4 Pro, begin by checking the charger. Here are some troubleshooting steps to follow:

  1. Check the charger compatibility: Ensure that you are using the correct charger for your DJI Mini 4 Pro. Using an incompatible charger can result in slow charging or no charging at all.
  2. Inspect the charger for damage: Look for any visible signs of damage, such as frayed wires or bent prongs. A damaged charger can affect the charging speed and even pose a safety risk.
  3. Try a different socket: Plug the charger into a different socket to rule out any issues with the power source. Sometimes, a faulty socket can prevent the charger from working properly.
  4. Consider the charging speed and battery lifespan: Keep in mind that the charging speed may vary depending on various factors, including the battery’s current charge level and the temperature. Also, remember that frequent charging can affect the battery’s lifespan over time.

Check the Battery

Continuing the troubleshooting process, it is important to examine the battery when experiencing charging issues with the DJI Mini 4 Pro. Start by checking the battery health.

Over time, batteries degrade and may not hold as much charge as when they were new. If the battery health is significantly degraded, it may be necessary to replace it.

Additionally, consider the charging speed. If the battery is not charging as quickly as expected, try using a different charging cable or wall adapter.

It is also important to be mindful of charging precautions. Avoid charging the battery in extreme temperatures, as this can affect its performance and lifespan.

Lastly, consider calibrating the battery. This involves fully discharging and then fully charging the battery to ensure accurate battery level readings.

Battery LED Indicators

Examining the battery LED indicators is essential for troubleshooting charging issues with the DJI Mini 4 Pro. The LED indicators provide valuable information about the battery status and can help identify any problems that may be affecting the charging process.

Here are some important things to know about the battery LED indicators:

  1. Blinking patterns: Different blinking patterns can indicate different issues with the battery. For example, if LED #3 blinks twice, it could indicate a specific problem.
  2. Battery troubleshooting: By closely observing the LED indicators, you can identify any issues with the battery and take appropriate troubleshooting steps to resolve them.
  3. Battery storage and safety: The LED indicators also play a crucial role in ensuring battery safety during storage. They can indicate if the battery is fully charged or if it needs to be charged before storage.
  4. Battery replacement options: If the LED indicators consistently show problems with the battery, it may be necessary to consider battery replacement options to ensure optimal performance and safety.
dji mini 4 pro with controller

Change the Charging Method

When troubleshooting charging issues with the DJI Mini 4 Pro, it is important to consider changing the charging method. If you’re having trouble charging the battery using one method, try using a different one.

There are several charging alternatives available for the DJI Mini 4 Pro. One option is wireless charging, which allows you to charge the battery without the need for cables.

Another option is fast charging, which can significantly reduce the charging time.

If you’re in a location with access to sunlight, you can also consider solar charging. This method harnesses the power of the sun to charge your battery.

Lastly, you can use USB charging, which is a widely available and convenient method for charging the DJI Mini 4 Pro.

Check for Overheating

To diagnose and address charging issues with the DJI Mini 4 Pro, it is crucial to assess for overheating. Overheating can occur if the battery is too hot after recent drone usage. It is important to prevent overheating as it can damage the battery and affect its lifespan.

Here are some tips to prevent overheating and optimize battery lifespan:

  1. Temperature monitoring: Keep an eye on the battery temperature during and after drone usage. If it is too hot, allow it to cool down before attempting to charge.
  2. Battery cooling techniques: Use cooling pads or fans to lower the battery temperature quickly. Avoid placing the battery in direct sunlight or near sources of heat.
  3. Safe charging practices: Ensure that the charging environment is cool and well-ventilated. Avoid charging the battery immediately after use to prevent overheating.
  4. Battery lifespan optimization: Follow the manufacturer’s recommendations for charging and storage temperature ranges. Avoid charging the battery to its maximum capacity every time, as this can contribute to overheating and reduce battery lifespan.
mini 4 pro rear side view

Battery Maintenance

For effective troubleshooting of charging issues with the DJI Mini 4 Pro, it is essential to start by performing battery maintenance. Regular battery maintenance is crucial to ensure optimal performance and longevity of the battery.

Here are some battery charging tips to keep in mind:

  • Always use the original charger and cable provided by DJI.
  • Avoid charging the battery immediately after a flight as it may still be warm.
  • Make sure the battery is completely dry before charging.

Additionally, it is important to follow battery safety precautions such as avoiding overcharging and extreme temperatures.

If you encounter any issues with the battery, it is recommended to follow the battery troubleshooting guide provided by DJI. If necessary, the battery replacement process should be carried out according to the manufacturer’s instructions to ensure proper functionality.

Battery Replacement

To troubleshoot charging issues with the DJI Mini 4 Pro, it is important to address potential battery replacement as a necessary step in maintaining optimal performance.

Over time, batteries can degrade and lose their ability to hold a charge, resulting in poor battery performance.

Here are some key points to consider when it comes to battery replacement for the DJI Mini 4 Pro:

  1. Battery lifespan: Understand that batteries have a limited lifespan, and eventually, they will need to be replaced.
  2. Battery care: Properly caring for your battery by following the manufacturer’s guidelines can help extend its lifespan and maintain its performance.
  3. Battery storage: Storing your battery in a cool and dry place when not in use can help prevent damage and maintain its overall health.
  4. Battery safety: When replacing the battery, ensure that you use a genuine DJI battery and follow all safety precautions to prevent any accidents or damage to your drone.

Conclusion

In conclusion, charging the DJI Mini 4 Pro drone battery requires using a compatible charger and following safety tips.

It is important to use the correct charger to ensure efficient charging and avoid damaging the battery.

The full charge time for the Mini 4 Pro may vary but it is important to allow sufficient time for a complete charge. Power bank charging can be used as an alternative option.

It is essential to troubleshoot any charging issues that may arise to ensure proper functionality of the drone.

Leave a Comment

Your email address will not be published. Required fields are marked *