How to Turn on DJI Mini 4 Pro Controller 1

How to Turn on DJI Mini 4 Pro Controller

This article provides a concise guide on how to turn on the DJI Mini 4 Pro controller.

It includes step-by-step instructions for first-time activation, troubleshooting non-functioning controllers, and connecting the controller after activation.

Summary – How to Turn on DJI Mini 4 Pro Controller

To turn on the DJI Mini 4 Pro controller, locate the power button on the top right corner and press it once, then press and hold it again. If the controller isn’t working, check the indicator light or screen for power status and troubleshoot as needed.

The article also highlights the importance of locating and pressing the power button and explains how to interpret indicator lights or screens for power status.

Whether you are a beginner or experienced user, this article will assist you in properly activating your DJI Mini 4 Pro controller.

dji mini 4 pro with controller

First-time DJI Mini 4 Pro controller activation

To activate the DJI Mini 4 Pro controller for the first time:

  1. Locate the power button on the top right corner of the controller. This power button function is essential for turning on the controller and starting the first-time setup process.
  2. Press the power button once to check the battery level. The controller will display the current battery level, allowing you to determine if it needs to be charged before use.
  3. After checking the battery level, press the power button again and hold it. This action will power on the controller, and you will see the indicator light turn on, indicating that the controller is ready for use.
  4. If you encounter any issues during the first-time setup, there are troubleshooting tips available to help you.
  5. It is important to ensure that the controller is fully charged before attempting to turn it on for the first time.
dji mini 4 pro drone midflight

Locate and press power button to turn on

Locating and pressing the power button is the first step to turning on the DJI Mini 4 Pro Controller. To do this, follow these simple steps:

  • Press and hold: Locate the power button on the top right corner of the controller. Press it once to check the battery level of the controller. The battery level will be displayed, allowing you to determine if it needs to be charged before use. After the first press, press the power button again, but this time, hold it. This second action will power on the controller.
  • Troubleshooting tips: If the controller does not turn on after pressing and holding the power button, ensure that the battery is properly inserted and charged. If the battery is fully charged and the controller still doesn’t turn on, try resetting it by removing the battery and then reinserting it.
  • Controller and drone linking: Once the controller is powered on, it needs to be linked with the drone before it can be used. Follow the manufacturer’s instructions to complete the linking process. This will establish a connection between the controller and the drone, allowing you to control its movements and settings.
  • Indicator light function: When the controller is successfully powered on, the indicator light on the controller will turn on and start working. The indicator light serves as a visual cue, indicating that the controller is ready for use.
mini 4 pro taking off

Additional steps for proper DJI Mini 4 Pro activation

To properly activate the DJI Mini 4 Pro, it is crucial to follow specific steps and settings.

First, make sure to charge the battery of the drone and the controller before use. This will ensure that you have enough power for a smooth activation process.

Additionally, it is recommended to update the firmware of the DJI Mini 4 Pro. Check the DJI Fly app for any available firmware updates and follow the on-screen instructions to install them.

This will ensure that you have the latest features and bug fixes for optimal performance.

Before activating the DJI Mini 4 Pro, it is important to review the user manual. This will provide you with a better understanding of the activation process and any troubleshooting steps that may be required.

It is also necessary to have an internet connection during the activation process. This will allow the DJI Fly app to communicate with the DJI servers and complete the activation successfully.

mini 4 pro camera settings

Troubleshoot non-functioning DJI Mini 4 Pro controller

If your DJI Mini 4 Pro controller is not functioning properly, there are a few troubleshooting steps you can take.

First, try pressing and holding the power button to see if it turns on.

Next, check the battery level and ensure it is adequately charged.

Additionally, examine the charging cable and LED indicator to ensure they are working correctly.

Press and Hold the Power Button

To troubleshoot a non-functioning DJI Mini 4 Pro controller, start by pressing and holding the power button for about 15 to 20 seconds. This action can sometimes reset the controller and allow it to power on.

If the power button is still not working after trying this troubleshooting step, there are a few other possible solutions to consider:

  • Check for controller firmware update: Ensure that the controller is running the latest firmware version by connecting it to a computer and using the DJI Assistant 2 software to check for updates.
  • Examine charging port issues: Inspect the charging port on the controller for any debris or damage that may be preventing proper charging or power button functionality.
  • Address controller connectivity problems: If the controller is not connecting to the drone or mobile device, try resetting the connection settings and pairing them again.
  • Power button repair: If none of the above steps resolve the issue, it may be necessary to seek professional repair or contact DJI customer support for further assistance.

Remember to always follow the manufacturer’s instructions and guidelines when troubleshooting and repairing electronic devices.

close up shot of dji mini 4 pro battery

Check the Battery Level

To troubleshoot a non-functioning DJI Mini 4 Pro controller, it is essential to check the battery level. Before assuming there is a more significant issue with the controller, make sure that the battery is not depleted.

To check the battery life, connect the controller to a power source using the charging cable and observe if any charging indicator lights up. If the battery is low, allow the controller to charge for a sufficient amount of time.

If the controller still does not turn on after charging, consider troubleshooting the charging cable for any potential issues. Additionally, check if the power button is working correctly.

If the battery is no longer holding a charge or the power button is faulty, it may be necessary to explore battery replacement options.

Check the Charging Cable

To troubleshoot a non-functioning DJI Mini 4 Pro controller, it is crucial to examine the integrity and proper connection of the charging cable. Checking the cable connection and ensuring it is plugged in tightly is the first step in troubleshooting.

Here are some steps to help you troubleshoot charging issues with the DJI Mini 4 Pro controller:

  • Inspect the cable for any signs of damage such as fraying or bent pins.
  • Test the charging port on the controller by plugging in another known working cable to see if it charges.
  • Verify that the power source you are using is functioning properly by testing it with another device.
  • If the cable is damaged, consider replacing it with a new one to ensure a proper connection.

Check the LED Indicator

Continuing the troubleshooting process for a non-functioning DJI Mini 4 Pro controller, the next step is to examine the LED indicator.

The LED indicator on the controller can provide valuable information about its status and any potential issues.

Troubleshooting LED indicator issues involves understanding the different LED colors and their meanings.

A solid green LED indicates that the controller is fully charged, while a blinking green LED suggests that it is in the process of charging.

Additionally, knowing how to interpret the LED blinking patterns can help identify specific problems.

Tips for troubleshooting LED indicator problems include checking the charging cable connection, ensuring the battery is properly inserted, and restarting the controller.

Common issues with the LED indicator include a red or no LED light, which can be resolved by replacing the battery or charging the controller respectively.

dji mini 4 pro drone aerial photography

Linking the Controller and Drone

To troubleshoot a non-functioning DJI Mini 4 Pro controller, begin by linking the controller and drone. Follow these steps to ensure a successful connection:

Check controller pairing:

  • Make sure the controller is turned on and in working condition.
  • Ensure that the drone is powered on and ready for pairing.
  • Place the controller within 0.5 meters of the aircraft during the linking process.

Verify controller range:

  • Ensure that the controller is within the recommended range for proper communication with the drone.
  • Avoid obstacles or interference that may affect the signal strength.

Update controller firmware:

  • Check for any available firmware updates for the controller and install them if necessary.
  • Keeping the firmware up to date can resolve compatibility issues and improve performance.

Factory Reset

To troubleshoot a non-functioning DJI Mini 4 Pro controller, the next step is to perform a factory reset on the controller. This can help resolve any software issues that may be causing the problem.

To perform a factory reset, start by locating the power button on the controller. Press and hold the power button for about 6 seconds until the controller powers off.

Once the controller is off, press and hold the power button again for about 6 seconds until the controller powers on. This will initiate the factory reset process.

After the factory reset is complete, you will need to go through the controller activation process again, including linking it to your drone and calibrating all the necessary settings.

It is also recommended to check the battery level of the controller before attempting the factory reset to ensure it has enough power.

dji mini 4 pro unfolded

Indicator light or screen for power status

The DJI Mini 4 Pro controller features an indicator light to display its power status. This indicator light is located on the front of the controller, near the power button.

When the controller is powered on, the indicator light will illuminate, indicating that the controller is ready to use.

Here are some key points about the indicator light and its functionality:

  • Power Button Location: The power button is located on the top of the controller, near the indicator light. To turn on the controller, simply press and hold the power button until the indicator light turns on.
  • Battery Level Checking: The indicator light also serves as a battery level indicator. When the controller is fully charged, all four LED indicator lights will be lit. During the charging process, these LED lights will blink sequentially to indicate the current battery level. When all the LED lights are off, it means that the battery is fully charged.
  • Troubleshooting Controller Issues: If you encounter any issues with the controller, such as it not turning on or the indicator light not working, try resetting the controller by pressing and holding the power button for about 5 seconds. This should help resolve any minor issues.
  • LED Indicator Functionality: The LED indicator lights not only display the battery level but also indicate other important information, such as when the controller is connected to a device or when it is in pairing mode. Pay attention to these indicators to ensure smooth operation of the controller.
dji mini 4 pro in flight 1

Connection steps after DJI Mini 4 Pro activation?

Now that you’ve activated your DJI Mini 4 Pro controller, the next step is to establish a connection with your drone for a smooth flying experience.

To do this, make sure that the batteries are fully charged and install the DJI Fly App on your smartphone.

Then, link the controller and drone by following the instructions provided by DJI.

After successfully linking them, activate the drone and calibrate the controller to ensure optimal performance.

Ensure the Batteries are Charged

After activating the DJI Mini 4 Pro, ensure that both the drone and controller batteries are fully charged. This is essential for a smooth flying experience and to avoid any interruptions during your flight.

Here are some steps to help you ensure the batteries are charged:

Checking battery level:

  • For the drone, check the battery level using the DJI Fly app or the battery indicator on the aircraft itself.
  • For the controller, check the battery level by pressing the power button and observing the battery indicator lights.

Troubleshooting charging issues:

  • Ensure that the charging cables are properly connected to the drone and controller.
  • If you encounter any issues, try using a different charging cable or power source.

Optimizing battery life:

  • Avoid overcharging the batteries by disconnecting them from the charger once they are fully charged.
  • Store the batteries in a cool and dry place when not in use.

Understanding power indicators:

  • Familiarize yourself with the power indicators on both the drone and controller so that you can easily monitor the battery levels.
mini 4 pro drone flying over hills

Install the DJI Fly App

To establish a seamless connection between your DJI Mini 4 Pro controller and the drone after activation, proceed with installing the DJI Fly app on your mobile device.

The app installation process is straightforward and can be done by visiting the App Store or Google Play Store, depending on your device’s operating system. The DJI Fly app is compatible with a wide range of mobile devices, including smartphones and tablets.

Once installed, you can explore the app’s features and settings, which allow you to control the drone, access flight modes, adjust camera settings, and view real-time video feed.

In case you encounter any issues during the app installation, common troubleshooting steps include checking your internet connection, clearing cache, and restarting your device.

It is also essential to regularly update the DJI Fly app to ensure improved performance and access to new features and bug fixes.

Link the Controller and Drone

To connect the DJI Mini 4 Pro controller to the drone after activation, follow the steps outlined in the controller’s ‘connection guide’ option and select the DJI Mini 4 Pro from the list of compatible drones.

Once you have established a connection between the controller and the drone, you can troubleshoot any connection issues that may arise.

Additionally, it is important to regularly update the controller firmware to ensure optimal performance and compatibility.

If you have multiple drones, you can pair them with one controller by following the pairing process for each individual drone.

The DJI Mini 4 Pro controller also offers advanced flight modes that can enhance your flying experience.

replacing dji mini 4 pro battery

Activate the Drone

Once the DJI Mini 4 Pro controller and drone have been activated, the next step is to establish a connection between the two devices.

To troubleshoot activation issues, ensure that the internet connection is stable during the activation process.

If you encounter internet connection issues, try restarting both the controller and the drone.

Additionally, make sure that the battery level of both devices is sufficient for a successful connection.

If the LED indicator on the controller or drone is not functioning properly, try resetting the devices and reconnecting them.

If you are still experiencing problems with the controller-drone connection, refer to the user manual for further troubleshooting steps or contact DJI customer support for assistance.

Calibrate the Controller

After activating the DJI Mini 4 Pro controller and drone, the next step is to establish a connection between the two devices by calibrating the controller.

Here are the steps to calibrate the controller and troubleshoot any issues that may arise:

  • Power on the controller by pressing and holding the power button until the LED light turns on.
  • Check the battery level of the controller by pressing the power button once. The LED light will indicate the battery level.
  • Power on the drone and wait for it to initialize.
  • Link the controller and drone by pressing the linking button on the drone and then pressing the linking button on the controller.

Once the connection is established, launch the DJI Fly app on your mobile device and follow the on-screen instructions to complete the calibration process.

how to use the dji mini 4 pro

Check the Flight Mode

To check the flight mode on the DJI Mini 4 Pro controller, refer to the switch located on the controller to select the appropriate mode for your flying needs. The flight mode selection is an important step in ensuring a smooth and controlled flight experience.

Different flight modes offer varying levels of speed, stability, and maneuverability. For example, Sport mode is designed for high-speed flying and agile movements, while Normal mode provides a balance between speed and stability.

On the other hand, Cine mode is ideal for capturing smooth and cinematic shots.

Make sure to check the controller settings before taking off to ensure that you have selected the mode that best suits your desired flying style and objectives.

Prepare for Takeoff

To ensure a smooth connection between the DJI Mini 4 Pro controller and the drone after activation, follow these steps:

  • Check the controller features and make sure they are functioning properly.
  • Verify the controller compatibility with the DJI Mini 4 Pro drone.
  • Update the controller firmware if necessary to ensure compatibility.
  • Follow the controller setup process provided in the user manual.

Troubleshooting tips: If you encounter any issues during the connection process, try the following:

  • Restart both the controller and the drone.
  • Ensure that the controller and drone are within range of each other.
  • Check for any interference from nearby devices or obstacles.
  • Reset the controller settings to default and try again.

Conclusion

To turn on the DJI Mini 4 Pro controller, locate the power button and press it.

If the controller is not functioning properly, troubleshoot the issue by checking the indicator light or screen for power status.

After activating the controller, follow the necessary steps to establish a connection.

Overall, activating and using the DJI Mini 4 Pro controller is a straightforward process.

Leave a Comment

Your email address will not be published. Required fields are marked *